ماء حمض الأسيتيك SENO Acetic Acetic Acetic Ac Acetic Ac Acetic Ac Acetic Water 0.6% مسحوق مجفف بالتجميد بالجملة بسعر الجملة

الوصف

Research-Grade Acidic Solvent for Lyophilized Peptide Studies

SENO Acetic Acid Water 0.6% is a sterile research-use solvent developed for the reconstitution and stabilization of lyophilized الببتيدات in laboratory environments. The solution provides a mildly acidic environment that supports peptide solubility, structural integrity, and experimental reproducibility during biochemical and molecular research applications.

Available in:

• AA3 — 3ml × 10 vials
• AA10 — 10ml × 10 vials

This formulation is widely used in peptide dissolution protocols, receptor-binding assays, analytical preparation, and preclinical peptide investigations where stable peptide handling conditions are required.

What Is Acetic Acid Water 0.6%?

Acetic Acid Water 0.6% is a sterile aqueous solution containing 0.6% acetic acid designed to improve the dissolution characteristics of sensitive lyophilized peptides. Certain peptides demonstrate limited solubility or reduced stability in neutral water alone. A mild acidic solvent environment can help maintain peptide conformation and reduce aggregation during reconstitution.

In laboratory peptide research, acidic aqueous solvents are commonly used when preparing peptides for:

• receptor signaling studies
• peptide stability analysis
• molecular interaction experiments
• analytical assay preparation
• biochemical pathway investigations

SENO Acetic Acid Water 0.6% is produced under controlled laboratory conditions and analytically verified for sterility, consistency, and research suitability.

التطبيقات البحثية

SENO Acetic Acid Water 0.6% is suitable for a broad range of laboratory peptide applications, including:

• Reconstitution of lyophilized peptides
• Preparation of peptide stock solutions
• Analytical peptide handling
• Receptor-binding studies
• Cell signaling experiments
• Molecular biology workflows
• Preclinical peptide investigations
• Biochemical pathway analysis
• Stability and degradation studies
• Academic and biotechnology laboratory research

The mildly acidic formulation may assist peptides that require lower pH conditions to improve dissolution behavior and short-term stability.

الصيغة الجزيئية

Main active component:

CH3COOHCH_3COOHCH3​COOH

Water component:

H2OH_2OH2​O

رقم سجل دائرة المستخلصات الكيميائية

مواصفات المنتج

Mechanism of Action in Peptide Reconstitution

Many peptides contain amino acid sequences that exhibit poor solubility under neutral pH conditions. Mildly acidic solvents can protonate ionizable groups within peptide structures, helping reduce intermolecular aggregation and improving dissolution efficiency.

Acetic Acid Water 0.6% provides:

• enhanced peptide wetting
• improved dissolution behavior
• reduced peptide aggregation
• stabilized short-term solution conditions
• more reproducible experimental preparation

This acidic environment is commonly utilized in peptide chemistry and molecular biology laboratories when preparing sensitive research peptides for downstream analysis.

Solubility Characteristics

Acetic Acid Water 0.6% is fully miscible with purified water and compatible with many peptide reconstitution workflows.

The solution is frequently used with:

• lyophilized peptide powders
• hydrophobic peptide sequences
• analytical peptide preparations
• receptor-binding assay solutions

Actual peptide solubility depends on:

• amino acid sequence
• نقاء الببتيد
• الوزن الجزيئي
• storage history
• experimental pH requirements

Researchers should optimize reconstitution conditions according to individual peptide characteristics.

توصيات التخزين

لتحقيق الاستقرار الأمثل:

• Store unopened vials at -20°C
• Protect from excessive heat and direct light
• تجنب التقلبات المتكررة في درجات الحرارة
• Maintain sterile handling procedures after opening

Prepared peptide solutions should generally be aliquoted into smaller volumes to minimize repeated freeze-thaw exposure.

معلومات الاستقرار

Under recommended storage conditions, Acetic Acid Water 0.6% maintains chemical stability and sterility for laboratory use.

Factors affecting peptide solution stability after reconstitution include:

• peptide sequence composition
• oxidation sensitivity
• freeze-thaw frequency
• التلوث الميكروبي
• exposure to light and heat

For sensitive peptides, freshly prepared solutions are generally preferred for critical analytical experiments.

Research Studies & Laboratory Use

Acidic aqueous solvents such as diluted acetic acid are widely referenced in peptide chemistry and biochemical research literature for peptide dissolution and stabilization protocols.

Typical laboratory applications include:

• peptide synthesis workflows
• analytical chemistry preparation
• receptor pharmacology studies
• protein-peptide interaction analysis
• molecular signaling experiments
• preclinical laboratory research

In many peptide handling protocols, low-concentration acetic acid solutions are utilized to improve reproducibility during preparation and analytical testing.

التصنيع وضمان الجودة

SENO Acetic Acid Water 0.6% is produced using automated sterile filling systems under controlled laboratory procedures.

Each production batch undergoes analytical verification including:

• sterility evaluation
• visual clarity inspection
• pH consistency testing
• HPLC analytical verification
• batch uniformity assessment

This quality-control workflow supports consistent laboratory performance and batch-to-batch reproducibility.

شهادة التحليل (COA)

Each batch may include analytical documentation covering:

• تحديد الدُفعات
• التحقق من النقاء
• فحص المظهر
• sterility confirmation
• تاريخ التصنيع
• storage recommendations

Researchers may request COA documentation for laboratory recordkeeping and internal quality assurance purposes.

HPLC / Analytical Verification

Quality verification procedures may include HPLC-based analytical assessment to confirm:

• chemical consistency
• absence of major contaminants
• solution uniformity
• قابلية التكرار على دفعات

Analytical review helps support reliable peptide preparation workflows in research environments.

دليل إعادة التشكيل

الإجراء المختبري الموصى به

1. Maintain aseptic handling techniques.
2. Remove the protective vial cap.
3. Slowly add Acetic Acid Water 0.6% to the lyophilized peptide vial.
4. Gently swirl the vial until fully dissolved.
5. تجنب الرج القوي أو الرغوة.
6. Aliquot prepared peptide solutions when possible.
7. Store reconstituted samples according to peptide-specific stability requirements.

احتياطات المناولة

• للاستخدام في الأبحاث المعملية فقط
• غير مخصص للتناول البشري أو البيطري
• استخدام معدات الوقاية الشخصية المناسبة أثناء المناولة
• Avoid microbial contamination
• Follow institutional laboratory safety procedures
• Dispose of unused material according to local regulations

معلومات الشحن

• FedEx worldwide shipping available
• Sterile protective vial packaging
• Secure packaging designed to maintain vial integrity
• Suitable for international laboratory transport

الأسئلة الشائعة (FAQ)

Why is acetic acid used for peptide reconstitution?

Some peptides dissolve more efficiently in mildly acidic environments. Acetic acid may help reduce peptide aggregation and improve dissolution consistency during laboratory preparation.

Can Acetic Acid Water 0.6% improve peptide stability?

For certain peptide sequences, acidic conditions may help maintain short-term structural stability after reconstitution. Stability depends on the peptide itself and storage conditions.

Is this product sterile?

Yes. SENO Acetic Acid Water 0.6% is prepared using sterile laboratory filling procedures and quality-control verification.

What peptides are commonly reconstituted using acidic solvents?

Acidic peptide solvents are frequently used for sensitive or hydrophobic peptide sequences that demonstrate limited solubility in neutral water.

Can the solution be frozen after opening?

Repeated freeze-thaw cycles should be minimized. Researchers commonly aliquot solutions into smaller volumes to preserve sample integrity.

Is this product intended for medical use?

No. This product is supplied strictly for laboratory research applications and is not intended for human or veterinary use.